Beijing Sentinain Technology Inc.

Model Number: SDT 8T-#9722 Brand Name: Sidolim Key Specifications/Special Features: Specifications:SiDoLim in situ sterilizable fermentor (SDT 300-1000L) system is a polite scale fermentor and designed for ease of useFermentor SDT 300-1000LFermentor SDT (300L-1000L) is large size pilot scale fermentation systems and top driving mechanism is applied head plate lifting system by air cylinder and linear motion guide is adapted in standard specificationSystem can be used for microbial, insect and mammalian cell culturing proceduresStainless steel (SUS 316L) vessel and whole attachments can be sterilized automatically or manually in this pilot scale fermentation system and whole fermentation procedures can be also performed automaticallyMeasured values of procedures and monitored data are graphically displayed in the 8.5 inches color LCD screen and all control parameters can be adjusted in graphic mode

Agitation	Drive	DC motor, AC gear motor top drive motor (mechanical drive)
	Range	50-550/1rpm
	Sensor	magnetic hall sensor
	Impellers	turbine impeller (SUS 316L) foam breaker (SUS 316L)
	Control	microprocessor based PID
Temperature	Range	from 3 above the cooling water temperature to 80 (accuracy 0.1 )
	Control	temperature is automatically controlled by the external heat exchanger system.
	Sensor	RTD (Pt-100)
Aeration	Sparger	ring sparger (SUS 316L)
	Inlet filter	cartridge type sterilizable pleated type 0.2μm absolute filter is applied
	Outer filter	same as inlet filter specification (optional item)
	Control range	different vessel size and/or ordered specifications
Materials and finish	Vessel	using 316L stainless steel it is polished mechanically and/or electrically
	Piping	316L stainless steel prevents contamination and is polished by electrically
	O-rings/gaskets	viton or silicone material is used for the O-ring and the EPDM is used for the gasket
Control unit	Panel	8.5 inches graphic color LCD, membrane keypad
	Communications	memory stick, printer, computer with RS-232C communication protocol
	Controller board	microprocessor based integrated controller board is adopted to measure, control and display the fermentation system
Pressure control		pressure is controlled manually and/or automatically
Power supply		220V/50/60Hz single phase, 380V 50/60Hz three phase